Product & Solutions

Upgrade 30L Jacketed Borosilicate Glass Reactor With Distillation Function

The integrated design of reactive distillation, the inside enters the reaction medium for stirring reaction, and the interlayer can be heated or cooled by different cold sources (cryoprotectant, hot water or hot oil). Set constant temperature conditions, in a closed glass reactor, stirring reaction and reflux distillation of reaction liquid can be carried out under normal or negative pressure conditions. It is an ideal equipment for modern fine chemical plants, biopharmaceuticals and new material synthesis test production.

Upgrade 10l Double Jacketed Glass Reactor For Laboratory

10l Double-layer Glass Reactor, Chemical And Biological Pharmaceutical Laboratory Equipment, 10l Double-layer Glass Reactor, Global Supply, Support After-sales.

Upgrade 100l Jacketed Pilot Lab Glass Reactor

50L chemical glass reactor Jacketed glass reactor for laboratory or pilot plant; glass material: high borosilicate glass 3.3; seal type: mechanical seal.

1L 2L 3L 5L Laboratory Small Double Jacketed Glass Stirred Reactor

● All glass components are high borosilicate glass 3.3, with excellent physical and chemical properties. ● It can be used in the range of high temperature (200 ℃) to low temperature (- 80 ℃). ● It can work under the pressure of - 0.1 MPa ~ 0.0 MPa. ● Anti corrosion discharge valve designed for discharge at the side without effusion.

Wiped-Film Distillation Equipment

Our wiped-film evaporator, often known as thin film evaporator are used to separate the compounds of heat-sensitive and highly viscous liquids using a vertical evaporator. As the fluid is poured into the machine, the rotor blade or wiper distributes the liquid to the evaporator’s inner surface to create a thin film. the film is usually 0.1 to 0.5 mm thin. Its thinness depends on the wiper’s capacity and the product’s viscosity, liquid throughput, and rotating speed. the film doesn’t contain hydrostatic pressure, concentration profile, or temperature gradient. they are particularly effective for applications such as concentrating dilute pharmaceutical intermediates and removing extraction or chromatography solvents from various target products.

Laboratory Small Glass Scraped Film Evaporator

In the thin film evaporator, the material is evenly distributed into a thin film by the scraper or rotor on the inner wall of the evaporator. Due to the high heat transfer efficiency of the liquid film, the light components are evaporated in a very short time, and the light components after vaporization are evaporated. The components are condensed and liquefied in an external condenser, thereby realizing the separation of the two components. The wiped film evaporator is mainly used for the separation of heat-sensitive and high-boiling products.

Wiped Film Molecular Distillation Equipment

The thin film evaporation and short-path distillation continuous industrialization device is a combination of a wiped-film evaporation system and a short-path distillation system. Filtration modules, rectification modules, etc. can also be added to the entire combination, which can be designed and combined according to customer process requirements. In many cases, it can reach Before the goal of molecular distillation, the material must be pretreated by degassing, solvent removal, and small molecule removal. This is a thin film evaporator that is very suitable for these tasks, otherwise the material is likely to splash when it first enters the evaporation chamber. , flash evaporation, degradation and other problems, resulting in the inability to achieve separation. The combined design can greatly improve the production efficiency of the short path distillation.

Stainless Steel Laboratory Continuous Wiped Film Evaporation Equipment

In the thin film evaporator, the material is evenly distributed into a thin film by the scraper or rotor on the inner wall of the evaporator. Due to the high heat transfer efficiency of the liquid film, the light components are evaporated in a very short time, and the light components after vaporization are evaporated. The components are condensed and liquefied in an external condenser, thereby realizing the separation of the two components. The wiped film evaporator is mainly used for the separation of heat-sensitive and high-boiling products.

< 1234...9 >

Global recruitment of distributors

If you recognize the brand, technology, products and market prospects of Aishengke, we look forward to establishing a strategic partnership with you for win-win cooperation and development. Looking forward to your joining!