Product Category
Upgrade 10l Double Jacketed Glass Reactor For Laboratory
Product Description
Share
Product Introduction
Product features and advantages:
|
1. According to the design concept of industrial reaction system, the product has added distillation function on the basis of single reaction synthesis, it can make distillation after the reaction, and remove low-boiling substances in the material, such as solvent, water, etc.; |
2. The condenser adopts an abdominal wall vertical condenser, which increases the heat exchange area, and adds a low-temperature jacket to keep the cold outside, which increases the processing capacity during the distillation process and reduces the energy loss caused by the environmental impact on the equipment. |
3. The product collection tank is added, which is convenient to operate. After the reaction is completed, open the bottom valve and discharge the material. |
4. The product is designed with a liquid phase reflux distributor, which is switched by valve operation. If closing the valve to make reaction, the low-boiling point solvent or catalyst is heated, volatilized and then returned to the reaction kettle through cold trap cooling. If opening the valve to make distillation, the low boiler evaporates after being heated, and the steam enters the collection tank through the reflux distributor after condensing |
|
5. The collection tank is connected to the return distributor with the method of the broadened mouth connection. The pipeline is made of PFA material, which has better anti-corrosion performance and intuitive observation. This design replaces hard connections of glass to reduces the risks of glass instruments’ damages during use or disassembly. |
6. The solid feeding is changed to a screw cap design, which is convenient to open/close. The material is made of PTFE, and a sealing ring is added to the sealing part connected to the reaction kettle to improve the air tightness of the system; |
|
7. The volume of the dripping tank is increased, which improves the processing capacity of the whole device; |
8. The on-site pressure gauge display is added to the reaction kettle to ensure real-time observation of pressure changes during the reaction/distillation process to prevent the pressure from being held back in the reaction kettle. The pressure gauge is selected from high-precision products with an accuracy level of 1.0; |
|
9. All valves are made of PTFE material, which has better sealing performance and is more convenient to clean/replace; |
10. The mechanical stirring seal adopts a new design, which has better air tightness and is more stable during high-speed operation; |
Parameter
| Model | A-GR-10-S | A-GR-20-S | A-GR-30-S | A-GR-50-S | A-GR-100-S | |
| The volume of the jacket of the kettle body L | 3 | 6 | 8 | 16 | 30 | |
| Effective volume L | 10 | 20 | 30 | 50 | 100 | |
| Condenser size (㎡) | 0.25 | 0.35 | 0.45 | 0.6 | 0.95 | |
| Dropping tank volume L (mL) | 1000 | 2000 | 2000 | 2000 | 10000 | |
| The size of the opening of the kettle lid | Agitator Insert | DN50 flange | DN50 flange | DN50 flange | 50#Flange | 60#Flange |
| Temperature Sensor | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | |
| Condenser port | DN50 Standard Grinding | DN50 Standard Grinding | DN50 Standard Grinding | DN50 ball mill mouth | DN50 ball mill mouth | |
| Liquid feed port | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | 34#Standard Grinding | |
| Dropping tank connection | DN40 Standard Grinding | DN40 Standard Grinding | DN40 Standard Grinding | DN40 Standard Grinding | DN40 Standard Grinding | |
| solid feed port | DN80 flange cover | DN80 flange cover | DN80 flange cover | DN80 flange cover | DN80 flange cover | |
| Glass Components | Borosilicate glass 3.3 | Borosilicate glass 3.3 | Borosilicate glass 3.3 | Borosilicate glass 3.3 | Borosilicate glass 3.3 | |
| Main frame | SUS304 | SUS304 | SUS304 | SUS304 | SUS304 | |
| Paddle (option) | Anchor/Paddle | Anchor/Paddle | Anchor/Paddle | Anchor/Paddle | Anchor/Paddle | |
| Motor | Brushless DC Motor | Brushless DC Motor | Brushless DC Motor | Brushless DC Motor | Brushless DC Motor | |
| Move method | Brake moving wheel | Brake moving wheel | Brake moving wheel | Brake moving wheel | Brake moving wheel | |
| Working temperature (℃) | -80～200 | -80～200 | -80～200 | -80～200 | -80～200 | |
| Maximum temperature difference (℃) | ≤80 | ≤80 | ≤80 | ≤80 | ≤80 | |
| The pressure in the kettle (bar) | -1~0 | -1~0 | -1~0 | -1~0 | -1~0 | |
| Jacket pressure (bar) | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | |
| Vacuum system boost rate (KPa/h) | ≤2KPa/h | ≤2KPa/h | ≤2KPa/h | ≤2KPa/h | ≤2KPa/h | |
| Agitator motor power | 120 | 120 | 120 | 180 | 200 | |
| Speed mode | Frequency control | Electronic Speed Control | Electronic Speed Control | Electronic Speed Control | Electronic Speed Control | |
| Speed adjustment range | 50～500rpm | 50～500rpm | 50～500rpm | 50～500rpm | 50～500rpm | |
| Temperature sensor | PT100 | PT100 | PT100 | PT100 | PT100 | |
| Temperature measurement range | -30~350℃ | -30~350℃ | -30~350℃ | -30~350℃ | -30~350℃ | |
| Interface size of stainless steel insulated hose | 3/4 thread | 3/4 thread | 3/4 thread | 3/4 male thread | 3/4 male thread | |
| Sealing material | PTFE | PTFE | PTFE | PTFE | PTFE | |
| Discharge valve installation height | 320mm | 320mm | 320mm | 320mm | 380mm | |
| Power | 220/240V 50/60Hz |
220/240V 50/60Hz |
220/240V 50/60Hz |
220/240V 50/60Hz |
220/240V 50/60Hz |
|
| Ambient temperature (℃) | 5～35 | 5～35 | 5～35 | 5～35 | 5～35 | |
| Ambient relative humidity | 65% | 65% | 65% | 65% | 65% | |
| Size (W×D×H mm) | 840×640×1780 | 840×640×1910 | 840×640×1910 | 900×690×2100 | 1270×810×2400 | |
| Weight (kg) | 48 | 67 | 75 | 82 | 119 | |
Product Appearance Display
Get the video of Upgrade 10l Double Jacketed Glass Reactor For Laboratory
Application Area
We will help customers to solve out problem in each research, most commonly in petrochemical industry, fine chemical industry, biopharmaceuticals, energy and environmental protection industry.
|
Chemical Engineering |
Scientific Research |
Medical Science |
|
Semiconductor |
Pharmaceuticals |
New Energy |
Key words:
Order Process
Interesting
lnquiry
Inform usage scenarios and technical requirements
Recommended solution
Confirm the details, modify the plan
Customer confirm
Finished product testing, lssue running video and test report
Customer confirm
Production
Pay proofing fee
Recommended solution
Make Sample PI
Packing and shipping
Customer receipt
Guided installation and operation
Satisfied to Sign
Confirm bulk order
Products Can Be Custmized
The volume of the reactor has a wide selection range and can be customized according to customer needs;
The material of the equipment can be customized according to customer requirements, and can provide 304, 316, 316L, titanium alloy, Hastelloy, fluorine lining and other materials for selection.
Company Profile
Aishengke (Jiangsu) Chemical Technology Co., Ltd. was established in 2015. It is an engineering company specializing in providing small-scale research and development, pilot-scale scale-up, electronic-grade materials and fine chemicals industrialization equipment for reaction and separation operations. The company's address is located at No. 109, Liuyanghe Road, Xinbei District, Changzhou, Jiangsu Province. It has an office building of 1500 square meters, a R&D and analysis laboratory of 500 square meters, and an equipment processing and manufacturing plant of 4500 square meters.The company has a senior design team and a processing and manufacturing team, including process development, equipment design, 3D modeling and other designers, glass and stainless steel equipment processing and manufacturing groups, to ensure the high level of process technology development, simulation calculation, mechanical design and manufacturing process.
Why Choose Us
QUALITY
Quality frst is our basic philosophy.
TRANSPORT
Keep strong transportation capacity and excellent price.
WARRANTY
Warranty, parts and labor services.
PROJECT TEAM
A complete project team to provide customers with one-stop service.
Our Certificate
After-sales Service
Replace damaged parts
One year warranty lifetime maintenance
Online technical support
Process
Shot the acceptance video
Submit video within 7 days with broken or missing parts
Reissue parts by express
Faq
Yes, we can provide samples. Considering the high value of our products, samples are not free, but we will give you the best price.
We Have Our Own Factory. We Are Experts In Reaction And Separation Process Technology. With Wanhua, Huawei, Smic And Many Other Customers, It Has Won Wide Acclaim In The Industry.
rotary evaporator, alcohol recovery equipment, short path distillation kit, glass molecular distillation equipment, falling film evaporator, jacketed glass reactor and other lab equipment.
Generally it is within 7 working days after receiving the payment if the goods are in stock. Or it is 15 working days if the goods are not in stock, depending on order quantity.
Payment≤15,000USD, 100% in advance. Payment≥15,000USD, 70% T/T in advance, balance before shipment. (If you are concerned about payment security for the first order, we advise you can place Trade Assurance Order via Alibaba. you will get 100% payment refund if we can't meet agreed delivery time.)
Online Message
Online Message
Recommended product
Lifting Double Jacketed 10L Glass Reactor
Lab 316l High Pressure Jacketed Stainless Steel Chemical Reactor Vessel
1L 2L 3L 5L Laboratory Small Double Jacketed Glass Stirred Reactor
50l 100l Lab Pilot-scale Chemical Double Jacketed Glass Reactor Vessel(lifting type)
Global recruitment of distributors
If you recognize the brand, technology, products and market prospects of Aishengke, we look forward to establishing a strategic partnership with you for win-win cooperation and development. Looking forward to your joining!
Contact Us
Manager Han: +86 150 5197 5149
Landline: +86 0519-85611172
Fax: +86 0519-85611132
Address: 3rd Floor, Office Area, No. 109, Liuyanghe Road, Xinbei District, Changzhou City