乙酸乙酯/乙醚回收提纯项目

乙酸乙酯/乙醚回收提纯项目

整个项目为EPC方式交付,该项目主要为客户搭建两套连续化精馏装置,处理能力为5t/d,两套装置分别提纯乙酸乙酯、乙醚这两个产品,整套系统具备现场实时监测,远程监控及操作,配备PLC控制系统及上位机软件,做到系统数据实时监测,历史数据及曲线查询,安全联锁等。
连续薄膜蒸发/短程蒸馏装置项目

连续薄膜蒸发/短程蒸馏装置项目

整个项目为EPC方式交付,该项目主要为客户建设两套连续化COP、OPMA生产装置,处理能力为1000t/a,整套系统属于交钥匙工程,从工艺设计及计算→核心设备设计及制作→模块化工程总装→开车调试,整套系统自动化程度高,具备远程监控及操作,配备DCS控制系统及上位机组态软件,做到系统数据实时监测及采集,历史数据及曲线查询,安全联锁等。
Electronic‑Grade High‑Purity Distillation Unit

Electronic‑Grade High‑Purity Distillation Unit

The high-purity continuous distillation unit is mainly composed of tower kettle reboiler, distillation tower, tower top condenser, reflux ratio distributor/reflux tank, tower internals, tower top collection tank, tower kettle collection tank, valves and pipe fittings, pumps, control system and other main components. All equipment materials are made of 316L stainless steel. The structure design of the tower kettle reboiler is mainly selected and designed according to the processing capacity and process requirements. The heating method mainly uses thermal oil/steam, and the heat exchanger is generally an external tube heat exchanger or an internal coil type. The tower top cooling mainly uses circulating refrigerant for heat exchange. Due to the experimental scale, cooling towers are generally not installed on site, so external circulating refrigeration equipment is generally matched for small-scale or pilot scale experiments.
Glass continuous distillation unit

Glass continuous distillation unit

The glass continuous distillation experimental device is mainly used for laboratory small-scale and pilot scale research and simulation. The main body of the equipment consists of important parts such as the raw material tank, preheater, tower kettle reboiler, distillation tower, distillation head, tower top reflux tank, tower top receiving tank, tower bottom receiving tank, feed pump, reflux pump, extraction pump, PTFE valve and pipeline. This system has normal pressure or pressure reduction operation, and the sealing requirements of the entire device are relatively high during the pressure reduction operation. During the experimental operation, pressure fluctuations will affect the stability of the entire experiment. Therefore, the glass connection part of the system is all connected with ball mouth flanges and sealed with PTFE gaskets.
Extraction and distillation device

Extraction and distillation device

The extraction distillation experimental device is mainly used for laboratory small-scale and pilot scale research and simulation. The equipment material of the small-scale continuous device is mainly glass material, which is easy to observe during the experimental process and can meet the operating conditions of normal/reduced pressure. However, the glass device is not pressure resistant and the equipment is prone to damage, so the small-scale device can also be made of stainless steel material; Due to the increased processing capacity of the pilot plant, all equipment materials are made of stainless steel.
High melting point distillation device

High melting point distillation device

During the distillation experiment, R&D personnel often encounter products with high melting points and poor flowability. Some products appear in a solid state at room temperature. When the synthesized products are purified using a distillation device, although a high and low temperature circulation unit has been configured in the top condenser, crystallization occurs at the reflux/extraction position, outlet connection, vacuum airflow duct, component outflow duct, sampling position, component collection tank, etc., which affects the normal flow of materials and makes the experiment impossible to proceed. Generally, R&D personnel use to wrap glass wool electric heating belts around areas that are prone to crystallization to ensure the continuation of experiments. However, this method brings many problems, such as low temperature control accuracy of the electric heating belt, uneven heating, and localized overheating of the product; If flammable and explosive liquids drip onto the surface of the electric heating belt, it will pose a safety hazard; The entire device is wrapped in an electric heating belt, which is not aesthetically pleasing and can affect the observation process during the experiment. Therefore, in order to solve these problems, our company has developed a high melting point substance distillation system.
Stainless steel intermittent distillation unit

Stainless steel intermittent distillation unit

The stainless steel gap distillation experimental device mainly consists of important parts such as tower kettle, distillation tower, condenser, reflux ratio, tower top receiving tank, vacuum system, control system, etc. The system has atmospheric pressure, reduced pressure, and pressurized gap distillation operations, and can also be used for reactive distillation experiments. After the reaction is completed, distillation separation experiments can be carried out. The design pressure needs to be based on the customer's process requirements. During the pressurization operation, it is necessary to consider the equipment's pressure resistance and voltage stabilization control. In the depressurization experiment, manual vacuum degree adjustment is achieved through the micro pressure regulating valve on the vacuum buffer tank.
Stainless steel pressurized distillation device

Stainless steel pressurized distillation device

The pressure control of the pressurized distillation tower is achieved by certain control measures to maintain the pressure of the distillation tower within a range higher than atmospheric pressure. The pressure control method of a pressurized distillation tower is related to the state of the distillate (liquid or gas phase) and the content of non condensable substances in the distillate; When fully gas phase extraction is achieved, the tower pressure is directly controlled by the extraction volume; Liquid phase extraction, when the distillate does not contain or contains a small amount of non condensable substances. Control tower pressure using condenser coolant or thermal bypass method; When gas-liquid two-phase extraction is carried out, or when the distillate contains a sufficient proportion of non condensable substances, the gas phase extraction controls the tower pressure, and the condenser coolant controls the temperature as an auxiliary tower pressure control.
Continuous rotary disc extraction device

Continuous rotary disc extraction device

The rotary extraction device mainly consists of a rotary extraction tower, a light phase tank, a residual phase tank, a motor stirring system, a heavy phase tank, an inlet and outlet conveying pump, a flow meter, a control system, etc.
Packing tower continuous extraction device

Packing tower continuous extraction device

The structure of the packed extraction tower is basically the same as the packed tower used for distillation and absorption. Suitable packing is installed inside the tower, with the light phase entering from the bottom and exiting from the top; Heavy phase enters from the top and exits from the bottom.
Stainless steel thin film evaporator system

Stainless steel thin film evaporator system

In a thin film evaporator, the material is evenly distributed into a thin film on the inner wall of the evaporator by a scraper or rotor. Due to the high heat transfer efficiency of the liquid film, the light components are evaporated in a very short time. The vaporized light components are condensed and liquefied in an external condenser, thus achieving the separation of the two components. The scraper evaporator is mainly used for the separation of heat sensitive and high boiling point products.
Pilot and industrial scraper evaporation device

Pilot and industrial scraper evaporation device

The main component of the thin film evaporation and scraping film evaporation system is the scraping film evaporator, which is a new type of high-efficiency evaporator that uses a rotating scraper to force film formation and flows at high speed, with high heat transfer efficiency and short residence time (about 10-50 seconds), and can perform falling film evaporation under vacuum conditions.
Laboratory type molecular distillation system

Laboratory type molecular distillation system

The laboratory type molecular distillation system is a laboratory small-scale experimental and validation device, mainly used for new product development or process data collection, and ultimately providing services for pilot or industrial scaling up. The main equipment consists of raw material tanks, short-range evaporators, cold traps, light component collection bottles, heavy component collection bottles, vacuum systems, control systems and other major components. All equipment materials are made of high borosilicate glass. The short-range evaporator is mainly heated by thermal oil, and the built-in condenser is matched with a high and low temperature unit to provide cold and heat sources. The cold trap is cooled by dry ice/liquid nitrogen.
Pilot and industrial short-range distillation equipment

Pilot and industrial short-range distillation equipment

The main equipment of the pilot/industrial short-range evaporation device consists of raw material tanks, short-range distillers, cold traps, valves and fittings, inlet/outlet pumps, two-stage vacuum systems, control systems, and other major components. All equipment materials are made of 316L stainless steel. The structural design of the short-range distiller is mainly selected and designed according to the processing capacity and process requirements. The heating method mainly uses thermal oil/steam, and the built-in condenser generally adopts a tube heat exchanger or a built-in coil type. The cooling form mainly uses circulating chilled water or hot water for heat exchange.
Continuous industrial device for thin film evaporation and short-range distillation

Continuous industrial device for thin film evaporation and short-range distillation

The continuous industrial device for thin film evaporation and short-range distillation is a combination of a scraping film evaporation system and a short-range distillation system. The entire combination can also include filtration modules, distillation modules, etc. It can be designed and combined according to customer process requirements. In many cases, before achieving the goal of molecular distillation, the material must be subjected to pretreatment such as degassing, solvent removal, and removal of small molecule substances. This is why thin film evaporators are very suitable for completing these tasks. Otherwise, the material may experience splashing, flash evaporation, degradation, and other problems when it first enters the evaporation chamber, resulting in the inability to separate. This combination design can greatly improve the production efficiency of short-range distillation.