Stainless steel thin film evaporator system
Are you still hesitating? You can contact our product experts first!
400-928-0585
Category
Keywords:
Stainless steel thin film evaporator system
- Product Details
-
Product Overview
In a thin film evaporator, the material is evenly distributed into a thin film on the inner wall of the evaporator by a scraper or rotor. Due to the high heat transfer efficiency of the liquid film, the light components are evaporated in a very short time. The vaporized light components are condensed and liquefied in an external condenser, thus achieving the separation of the two components. The scraper evaporator is mainly used for the separation of heat sensitive and high boiling point products.
Thin film evaporators all use heat-conducting oil medium for heating. Due to the equipment material being high borosilicate glass, the characteristics of the product and liquid film, as well as the situation after vaporization and condensation, can be clearly observed during the distillation process. This visibility is very important for the experimental process and data collection.
Product Application
Scraper type thin film evaporators have been widely used in heat exchange engineering.
Especially for the heat exchange of thermosensitive materials (with short time), the scraper is conducive to heat exchange, and through different scraper designs, complex product distillation can be carried out.
Scrap film evaporators have been used in the following fields for the purpose of evaporation concentration, desolvation, stripping, reaction, degassing, deodorization, etc., and have achieved good results.
AI SHENG KE Wiped-Film Evaporator (WFE)
Product Introduction
The glass scraping film evaporation device is a laboratory scale small-scale trial device mainly used for new product development or process data collection, ultimately providing services for industrial scaling up. The main equipment consists of raw material tanks, scraper evaporators, external condensers, cold traps, vacuum systems, control systems, and other major components. All equipment materials are made of high borosilicate glass, and the scraper evaporator is mainly heated by thermal oil. The external condenser is matched with an ice machine to provide a cold source, and the cold trap is cooled by dry ice/liquid nitrogen.
This device operates in an intermittent manner, and the feed rate is generally designed to be 0.1~3L/h. Please refer to the equipment specification table for selection and purchase.
Technical Specifications Sheet
Model AG‑SFE70‑4 AG‑SFE70‑7 AG‑SFE125‑15 AG‑SFE150‑25 AG‑SFE180‑30 Evaporator Inner Diameter (mm) 70 70 125 150 180 Evaporator Area (㎡) 0.04 0.07 0.15 0.25 0.3 Processing Capacity (Subject to product properties) 0.1~2 kg/h 0.1~3 kg/h 0.3~6 kg/h 0.3~10 kg/h 0.6~12 kg/h Max. Design Temperature 50‑300℃ (maximum design temperature). Operation at ≤200℃ is recommended. Vacuum Degree **Single‑stage or two‑stage vacuum system optional; minimum vacuum degree down to 0.1 Pa.
Product Inquiry
Attention: Please leave your email address, and our professionals will contact you as soon as possible!
Contact Us
E-mail: sales02@js-ask.com
Fax: +86-519-85611132
Address: 3rd Floor, Office Area, No. 109, Liuyanghe Road, Xinbei District, Changzhou City
Copyright © 2026 Aisengke (Jiangsu) Chemical Technology Co., Ltd. ALL Rights Reserve