Product Category
Rotary evaporator
Product Description
Share
Product Introduction
Product technical features
●The glass components are all high borosilicate glass 3.3, with excellent physical and chemical properties.
●LCD display, digital display of temperature and speed, one-key shuttle setting.
●There is an over-temperature protection device to prevent dry burning accidents.
●Main cooling + auxiliary cooling, high efficiency double reflux condenser, large condensation area and high recovery rate.
●The three-way bottle made of high borosilicate glass acts as a buffer, which can prevent the material in the rotating bottle from entering the condenser due to boiling, and ensure the normal distillation.
●Adopt "Teflon + FV rubber, fluorine rubber double sealing ring" technology to ensure sealing.
●The interface design of the collecting bottle is reasonable, which can realize the discharge of the collected liquid without affecting the continuous distillation process.
●The bathtub adopts electric lifting and lowering, which is easy to operate; there is a heat insulation protective cover outside the tank to prevent burns.
●Teflon material discharge valve, corrosion-resistant and pollution-free.
●The connection of glass components adopts quick-install flange, which is very convenient to disassemble and install.
●The caster structure with brake device is convenient for moving equipment and installation and positioning.
The main technical parameters
| Model | R-1020 | |
| Temperature adjustment range (°C) | Room temperature+5～95 | |
| Temperature control accuracy (℃) | ±1.5 | |
| Speed adjustment range (rpm) | 20～130 | |
| Speed adjustment | Stepless speed regulation | |
| Vacuum system boost rate | ≤2kPa/h | |
| Heating power (W) | 6000 | |
| Rotating motor power (W) | 250 | |
| Rated power of the whole machine (W) | 6300 | |
| Display | LCD digital display | |
| Lift form | Electric | |
| Lift stroke | 0～190mm | |
| Condenser form | Main cooling + secondary cooling, high efficiency triple reflux condenser | |
| Condensing area (㎡) | Main Cold: 0.948 | |
| Secondary cooling: 0.358 | ||
| Spin bottle | 20.0L, Flange Φ125mm | |
| Collection bottle volume (L) | 10.0 | |
| Bathtub | SUS304 material, Φ450mm×260mm | |
| Vacuum Sealed | Teflon+Teflon-Viton double seal | |
| Discharge valve (spool) | PTFE | |
| Evaporation capacity (L/h) | Water | 5.0 |
| Ethanol | 14.3 | |
| Protection Features | Overcurrent, ground fault and overtemperature | |
| Optimum ambient temperature (°C) | 5～35 | |
| Ambient Relative Humidity (%) | ≤ 70 | |
| Power | 3～, 380V, 50Hz | |
| Dimension (mm) | 1120W×680D×1900H | |
| Weight (kg) | 90 | |
Key words:
Order Process
Interesting
lnquiry
Inform usage scenarios and technical requirements
Recommended solution
Confirm the details, modify the plan
Customer confirm
Finished product testing, lssue running video and test report
Customer confirm
Production
Pay proofing fee
Recommended solution
Make Sample PI
Packing and shipping
Customer receipt
Guided installation and operation
Satisfied to Sign
Confirm bulk order
Products Can Be Custmized
The volume of the reactor has a wide selection range and can be customized according to customer needs;
The material of the equipment can be customized according to customer requirements, and can provide 304, 316, 316L, titanium alloy, Hastelloy, fluorine lining and other materials for selection.
Company Profile
Aishengke (Jiangsu) Chemical Technology Co., Ltd. was established in 2015. It is an engineering company specializing in providing small-scale research and development, pilot-scale scale-up, electronic-grade materials and fine chemicals industrialization equipment for reaction and separation operations. The company's address is located at No. 109, Liuyanghe Road, Xinbei District, Changzhou, Jiangsu Province. It has an office building of 1500 square meters, a R&D and analysis laboratory of 500 square meters, and an equipment processing and manufacturing plant of 4500 square meters.The company has a senior design team and a processing and manufacturing team, including process development, equipment design, 3D modeling and other designers, glass and stainless steel equipment processing and manufacturing groups, to ensure the high level of process technology development, simulation calculation, mechanical design and manufacturing process.
Why Choose Us
QUALITY
Quality frst is our basic philosophy.
TRANSPORT
Keep strong transportation capacity and excellent price.
WARRANTY
Warranty, parts and labor services.
PROJECT TEAM
A complete project team to provide customers with one-stop service.
Our Certificate
After-sales Service
Replace damaged parts
One year warranty lifetime maintenance
Online technical support
Process
Shot the acceptance video
Submit video within 7 days with broken or missing parts
Reissue parts by express
Faq
Yes, we can provide samples. Considering the high value of our products, samples are not free, but we will give you the best price.
We Have Our Own Factory. We Are Experts In Reaction And Separation Process Technology. With Wanhua, Huawei, Smic And Many Other Customers, It Has Won Wide Acclaim In The Industry.
rotary evaporator, alcohol recovery equipment, short path distillation kit, glass molecular distillation equipment, falling film evaporator, jacketed glass reactor and other lab equipment.
Generally it is within 7 working days after receiving the payment if the goods are in stock. Or it is 15 working days if the goods are not in stock, depending on order quantity.
Payment≤15,000USD, 100% in advance. Payment≥15,000USD, 70% T/T in advance, balance before shipment. (If you are concerned about payment security for the first order, we advise you can place Trade Assurance Order via Alibaba. you will get 100% payment refund if we can't meet agreed delivery time.)
Online Message
Online Message
Recommended product
undefined
Global recruitment of distributors
If you recognize the brand, technology, products and market prospects of Aishengke, we look forward to establishing a strategic partnership with you for win-win cooperation and development. Looking forward to your joining!
Contact Us
Manager Han: +86 150 5197 5149
Landline: +86 0519-85611172
Fax: +86 0519-85611132
Address: 3rd Floor, Office Area, No. 109, Liuyanghe Road, Xinbei District, Changzhou City