Use and maintenance of stainless steel laboratory reactor
Release Time:
2023-03-27
Pageviews:
The stainless steel lab reactor is a container for chemical reactions, requiring simple operation, easy use, light structure, and easy access.
Use and maintenance of stainless steel laboratory reactor:
When using a stainless steel lab reactor, the valve of the refrigerant inlet pipe must be closed, and the remaining refrigerant in the anti-disease pot and the jacket should be put in, and then the materials should be input, the agitator should be started, and the steam valve and electric heating power should be turned on. Turn off the steam valve and electric heating power supply, and then turn off the agitator after 2~3 minutes. After processing, after draining the remaining condensed water in the pot and the jacket, rinse with warm water as soon as possible to brush off the sticky material, then thoroughly clean the inner wall of the container with 40~50 ℃ alkaline water, and rinse with clean water. When there is no material (heat-absorbing medium) in the pot and the pot is empty, the steam valve and electric heating power supply must not be opened, and special attention should be paid to the use of steam pressure, which must not exceed the rated working pressure.
To maintain the stainless steel lab reactor, you should always pay attention to the working conditions of the whole equipment and the reducer. If the reducer lubricating oil is insufficient, it should be replenished immediately. The electric heating medium oil should be replaced every six months. Pressure gauges, thermometers, distillation holes, electric heating rods, electrical instruments, etc. should be checked regularly, and if there is a fault, it should be replaced or repaired in time.
When the stainless steel lab reactor is not in use, it must be thoroughly cleaned with warm water on the inner and outer walls of the container, and the pot body should be scrubbed frequently to keep the appearance clean and the inner tank bright, so as to achieve the purpose of durability.
Latest News
2024-09-03
Abstract: Oil deacidification is an important step in food processing, which aims to remove free fatty acids in oil and improve its quality and stability. Traditional deacidification methods have some limitations, such as low efficiency, high energy consumption, and loss of nutrients. In recent years, molecular distillation technology has gradually attracted attention as a new deacidification method. This article will introduce the application of molecular distillation in oil deacidification, including the principle, operation process and advantages, and focus on the outstanding advantages of Aishengke in molecular distillation technology.
Vitamins are products that are closely related to people's lives, and have become one of the main bulk products in the international pharmaceutical and health care products market. The amount of vitamin E is the largest, followed by vitamin A, vitamin C, vitamin D and so on. With the growth of economy and the improvement of people's living standards, the demand for vitamin products will further increase, and people's requirements for their quality and grade will also further increase. Therefore, as an important separation technology in the production of many vitamins, molecular Distillation technology will also play an increasingly important role in the vitamin industry.
Glyceryl monostearate (GMS), abbreviated as monoglyceride, is produced from natural vegetable oils and fats. The active ingredient is purified by molecular distillation technology to more than 90%, also known as molecular distillation monoglyceride. It is the most widely used food Additives, safe to use in the production and processing of food, medicine, plastics, etc., account for more than half of the emulsifier consumption in the market.
The principle of molecular distillation is to make use of the different degrees of affinity between different molecules. By controlling the conditions such as temperature and pressure, the mixture begins to vaporize. Different components in the vapor form liquids in the condenser and are separated according to their boiling points. This distillation method not only has a good separation effect, but also can be repeatedly separated and purified, and is widely used in chemical, pharmaceutical and other fields.
Molecular distillation is a common chemical method used to separate and purify compounds. In the pharmaceutical industry, molecular distillation is widely used in pharmaceutical purification. This article will focus on the application of molecular distillation in pharmaceutical purification and provide some specific examples.
Laboratory vacuum distillation equipment has undergone significant advancements in recent years, driven by the need for higher efficiency, improved safety, and enhanced user experience.
Global recruitment of distributors
If you recognize the brand, technology, products and market prospects of Aishengke, we look forward to establishing a strategic partnership with you for win-win cooperation and development. Looking forward to your joining!
Contact Us
Manager Han: +86 198 5022 2118
Landline: +86 0519-85611172
Fax: +86 0519-85611132
Address: No. 109 Liuyanghe Road, Xinbei District, Changzhou City