Repair and maintenance of stainless steel reactor
Release Time:
2022-11-04
Pageviews:
When using a stainless steel reactor, the refrigerant inlet valve must be closed, and the remaining refrigerant in the pot and jacket must be exhausted, then input the material, start the stirrer, and then open the steam valve and electric heating power supply. After reaching the required temperature, it should be closed first. Steam valve and electric heating power supply, turn off the stirrer after 2 to 3 minutes. After processing, after draining the remaining condensed water in the pot and jacket, rinse with warm water as soon as possible, brush off the sticky materials, and then use 40 ℃ ~ 50 ℃ alkaline water is fully cleaned on the inner wall of the container, and rinsed with clean water, especially when there is no material (heat-absorbing medium) in the stainless steel reaction kettle, the steam valve and electric heating power supply shall not be opened, and special attention shall be paid to the use of steam pressure. Exceeded working pressure.
When maintaining the stainless steel reaction kettle, you should always pay attention to the working conditions of the entire equipment and the reducer. If the lubricating oil of the reducer is insufficient, it should be replenished immediately. The electric heating medium oil should be replaced every six months. Tables, distillation holes, electric heating rods, electrical instruments, etc. should be inspected regularly. If there is any fault, they should be replaced or repaired immediately. When the equipment is not in use, be sure to use warm water to thoroughly clean the inner and outer walls of the container, scrub the pot frequently, and keep the outer surface clean and the inner tank clean. Bright and durable.
Latest News
2024-09-03
Abstract: Oil deacidification is an important step in food processing, which aims to remove free fatty acids in oil and improve its quality and stability. Traditional deacidification methods have some limitations, such as low efficiency, high energy consumption, and loss of nutrients. In recent years, molecular distillation technology has gradually attracted attention as a new deacidification method. This article will introduce the application of molecular distillation in oil deacidification, including the principle, operation process and advantages, and focus on the outstanding advantages of Aishengke in molecular distillation technology.
Vitamins are products that are closely related to people's lives, and have become one of the main bulk products in the international pharmaceutical and health care products market. The amount of vitamin E is the largest, followed by vitamin A, vitamin C, vitamin D and so on. With the growth of economy and the improvement of people's living standards, the demand for vitamin products will further increase, and people's requirements for their quality and grade will also further increase. Therefore, as an important separation technology in the production of many vitamins, molecular Distillation technology will also play an increasingly important role in the vitamin industry.
Glyceryl monostearate (GMS), abbreviated as monoglyceride, is produced from natural vegetable oils and fats. The active ingredient is purified by molecular distillation technology to more than 90%, also known as molecular distillation monoglyceride. It is the most widely used food Additives, safe to use in the production and processing of food, medicine, plastics, etc., account for more than half of the emulsifier consumption in the market.
The principle of molecular distillation is to make use of the different degrees of affinity between different molecules. By controlling the conditions such as temperature and pressure, the mixture begins to vaporize. Different components in the vapor form liquids in the condenser and are separated according to their boiling points. This distillation method not only has a good separation effect, but also can be repeatedly separated and purified, and is widely used in chemical, pharmaceutical and other fields.
Molecular distillation is a common chemical method used to separate and purify compounds. In the pharmaceutical industry, molecular distillation is widely used in pharmaceutical purification. This article will focus on the application of molecular distillation in pharmaceutical purification and provide some specific examples.
Laboratory vacuum distillation equipment has undergone significant advancements in recent years, driven by the need for higher efficiency, improved safety, and enhanced user experience.
Global recruitment of distributors
If you recognize the brand, technology, products and market prospects of Aishengke, we look forward to establishing a strategic partnership with you for win-win cooperation and development. Looking forward to your joining!
Contact Us
Manager Han: +86 198 5022 2118
Landline: +86 0519-85611172
Fax: +86 0519-85611132
Address: No. 109 Liuyanghe Road, Xinbei District, Changzhou City